
KEY SPECIFICATIONS
3GPP NR Release | R 16 |
---|---|
Duplexing | TDD |
Frequency Bands | mmWave [FR2] |
Bandwidth | 200 MHz |
SCS | 120 KHz |
Modulation Scheme | Up to 64-QAM for UL/DL |
Throughput (DL) | 1.4 Gbps |
Throughput (UL) | 500 Mbps |
Sub Layers | MAC, RRC, NAS, BAP, PDCP-C, RLC |
Single Relay Mode | Yes, Supported |
Multi HOP Relay Mode | Yes, in roadmap |
10 GbE Interface | Supported with IAB-DU (<GHz BTS) |
UICC Terminal Interface | Yes, Supported |
OAM Support | Yes |
What is IAB – MT ?
Integrated Access Backhaul allows for single or multi-hop backhauling using the same frequencies employed for user equipment (UE) access or a distinct, dedicated, frequency.
IAB leverages the spectral efficiencies of new radio and the increased capacity afforded by the higher bands available in 5G to deliver an alternative to optical cell site backhaul. This alleviates one of the primary issues surrounding the deployment of 5G that can be employed as a short-term alternative to fiber or as a permanent option for more isolated antennas or those without right of way access.
Any future migration is aided by IAB’s adoption of the Internet Protocol (IP) over a new Backhaul Adaption Protocol (BAP) layer defined within 3GPP TS 38.340.
What is Network in a Box ?
Key Deployment scenarios
Key Specifications
What is Network in a Box ?
Network in a Box (NIB) is concept that
supports a ready-in-minutes portable
5G SA network solution. all the
hardware and software required to
support 5G stand-alone (SA), non-
stand-alone (NSA) or 4G LTE
operations are integrated into this
single unit. The NIB comes
integrated with a 5G Core, along with
an integrated gNodeB to provide
comprehensive support for voice,
text, video, and packet data services.
Key Deployment scenarios
- Critical networks
- Off Shore Sites
- PPDR
- Private Networks
Key Specifications
System Parameter | Values |
---|---|
Band | n78, n28 |
Power Supply | -48 V DC |
Power Consumption | <250 W |
Weight | <15 kg |
Temperature | -40 C to 55C |
Humidity | 0 to 95%, non-condensing |
# Output Ports | 4T 4R |
Output TX Power | 4 x 5W, 4 x 10W in roadmap |
Antenna Type | Connected to RF front end AFE board via SMA/ Snap-On SMA connectors |
Synchronization | GNSS/GPS/IEEE 1588-PTP |
Management & debugging | 1 G Ethernet |
Debug port | Serial port (Ethernet over USB) |
Connectors | USB, JTAG (USB type), HDMI, UART (uUSB) |
Intra-gNB connection | 10 G SFP+ |
Switches | On/Off Switch with Indication Reset Switch |
Electrical safety | UL 60950 – Ed.3 2000, EN 60950 Ed.2001, CSA C22.2 No 60950 |
Environmental Conditions | ETSI EN 300 019-1-1 V2.2.1 |
Mechanical | IEC 60297-3 |
Inflammability | UL94 |
Enclosure | Heat Sink on one side, Dielectric for Antenna Radiation on another side |
Heat Sink Type | Convection/Fins/ Non-active cooling |
Technical Specs 1
Technical Specs 2
Technical Specs 3
Technical Specs 4
Technical Specs 1
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Technical Specs 2
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Technical Specs 3
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Technical Specs 4
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.